検索対象:     
報告書番号:
※ 半角英数字
 年 ~ 
 年
検索結果: 148 件中 1件目~20件目を表示

発表形式

Initialising ...

選択項目を絞り込む

掲載資料名

Initialising ...

発表会議名

Initialising ...

筆頭著者名

Initialising ...

キーワード

Initialising ...

使用言語

Initialising ...

発行年

Initialising ...

開催年

Initialising ...

選択した検索結果をダウンロード

論文

On the velocity and frequency of disturbance waves in vertical annular flow with different surface tension and gas-liquid density ratio

Zhang, H.*; 梅原 裕太郎*; 吉田 啓之; 森 昌司*

International Journal of Heat and Mass Transfer, 211, p.124253_1 - 124253_13, 2023/09

 被引用回数:3 パーセンタイル:74.38(Thermodynamics)

In this study, the characteristics of disturbance waves, including velocity, longitudinal size, and frequency, are comprehensively investigated by conducting gas-liquid upward annular flow experiments in a 5 mm tube through the constant electric current method (CECM). The film thickness time trace is recorded concerning time, and the information on disturbance waves is subsequently extracted. The effect of liquid and gas flow rate, density ratio, and surface tension on the disturbance wave is quantitatively analyzed. A predictive model of the wave velocity based on the shear stress balance of the liquid film is proposed. A physical model for wave frequency prediction is derived on the basis of the mass conservation equation. A simple empirical model with good prediction accuracy of wave frequency is also derived. Compared with existing correlations available in the literature, the newly derived models show better performance under a wide range of flow conditions.

論文

Effect of gas density and surface tension on liquid film thickness in vertical upward disturbance wave flow

Zhang, H.*; 森 昌司*; 久野 努*; 吉田 啓之

International Journal of Multiphase Flow, 159, p.104342_1 - 104342_15, 2023/02

 被引用回数:5 パーセンタイル:62.35(Mechanics)

At the gas-liquid interface, disturbance waves with various heights commonly arise. Because the thin liquid film between two successive disturbance waves leads to the dryout on the heating surface and limits the performance of the heating components, complete knowledge of the film thickness and disturbance waves is crucial. However, most existing experimental data and analysis are limited to near atmospheric conditions, and the liquid gas density ratio is much higher than in practical nuclear applications. In this study, we use nitrogen gas and water under the system pressures of 0.2 and 0.4 MPa and HFC134a gas and water under the system pressure of 0.7 MPa. The density ratio can be varied between 32 and 434. Based on experimental results, two models are proposed to predict the averaged film thickness and wave height, which are then compared with previous data.

論文

CFD analysis on stratification dissolution and breakup of the air-helium gas mixture by natural convection in a large-scale enclosed vessel

Hamdani, A.; 安部 諭; 石垣 将宏; 柴本 泰照; 与能本 泰介

Progress in Nuclear Energy, 153, p.104415_1 - 104415_16, 2022/11

 被引用回数:3 パーセンタイル:66.21(Nuclear Science & Technology)

This paper describes the computational fluid dynamics (CFD) analysis and validation works from the previous experimental study on the natural convection driven by outer surface cooling in the presence of density stratification consisting of air and helium (as a mimic gas of hydrogen). The experiment was conducted in the Containment InteGral effects Measurement Apparatus (CIGMA) facility at Japan Atomic Energy Agency (JAEA). The numerical simulation was carried out to analyze the detailed effect of the cooling region on the erosion of the helium stratification layer. The temporal and spatial evolution of the helium concentration and the gas temperature inside the containment vessel was predicted and validated against the experimental data. In addition, two stratification behaviors that depend on the cooling location were presented and discussed. The CFD simulation confirmed that an upper head cooling caused two counter-rotating vortexes in the helium-rich zone. Meanwhile, the upper half body cooling caused two counter-rotating vortexes in the helium-poor zone. These findings are important to understand the mechanism of the density stratification process driven by natural convection in the containment vessel.

論文

The OECD/NEA Working Group on the Analysis and Management of Accidents (WGAMA); Advances in codes and analyses to support safety demonstration of nuclear technology innovations

中村 秀夫; Bentaib, A.*; Herranz, L. E.*; Ruyer, P.*; Mascari, F.*; Jacquemain, D.*; Adorni, M.*

Proceedings of International Conference on Topical Issues in Nuclear Installation Safety; Strengthening Safety of Evolutionary and Innovative Reactor Designs (TIC 2022) (Internet), 10 Pages, 2022/10

The WGAMA activity achievements have been published as technical reports, becoming reference materials to discuss innovative methods, materials and technologies in the fields of thermal-hydraulics, computational fluid dynamics (CFD) and severe accidents (SAs). The International Standard Problems (ISPs) and Benchmarks of computer codes have been supported by a huge amount of the databases for the code validation necessary for the reactor safety assessment with accuracy. The paper aims to review and summarize the recent WGAMA outcomes with focus on new advanced reactor applications including small modular reactors (SMRs). Particularly, discussed are applicability of major outcomes in the relevant subjects of passive system, modelling innovation in CFD, severe accident management (SAM) countermeasures, advanced measurement methods and instrumentation, and modelling robustness of safety analysis codes. Although large portions of the outcomes are considered applicable, design-specific subjects may need careful considerations when applied. The WGAMA efforts, experiences and achievements for the safety assessment of operating nuclear power plants including SA will be of great help for the continuous safety improvements required for the advanced reactors including SMRs.

報告書

S波スプリッティング解析を用いたスラブ起源流体の移行経路推定の試み

平塚 晋也; 浅森 浩一; 雑賀 敦

JAEA-Research 2022-002, 38 Pages, 2022/06

JAEA-Research-2022-002.pdf:4.49MB

日本列島の下に沈み込むスラブから脱水して上昇してくる深部流体は、高温かつ炭酸化学種に富むなどの特徴を有することから、その特徴や分布、地表への移行経路を把握することは高レベル放射性廃棄物の地層処分における調査・評価においても重要である。これらスラブ起源流体の移行経路としては、クラックが高密度に分布する領域が考えられ、こうした領域は周囲に比べてより強い地震波速度の異方性を示すと予想される。異方性媒質に入射したS波は、振動する方向によって異なる速度で伝播するS波偏向異方性を示すため、互いに直交する方向に振動し、異なる速度で伝播する2つの波に分裂するS波スプリッティング現象が生じる。本報告書では、まず、S波スプリッティング解析の原理について詳しく説明する。次に、和歌山県田辺市本宮町周辺を事例対象として、S波スプリッティング解析を行った結果を示す。最後に、先行研究による温泉水及び遊離ガス中に含まれるヘリウム同位体比($$^{3}$$He/$$^{4}$$He)の分布や、本宮地域を横断する測線に沿って行われた二次元比抵抗構造解析の結果との比較に基づき、スラブ起源流体の移行経路の推定を試みた。検討の結果、温泉水及び遊離ガス中に含まれるヘリウム同位体比($$^{3}$$He/$$^{4}$$He)が高く、スラブ起源流体が上昇してきている可能性が高いとみなされる場合は、2つの波に分裂したS波の到達時間差(dt)も大きな値を示す傾向にあることが明らかとなった。また、二次元比抵抗構造解析の結果との比較によれば、高比抵抗領域においては、dtは小さい値を示す。それに対し、低比抵抗領域においては、dtは大きな値を示しており、本宮地域に対してスラブ起源流体は西側の深部から上昇してくるとする先行研究による解釈と調和的であることが分かった。

論文

Experimental analysis on dynamics of liquid molecules adjacent to particles in nanofluids

橋本 俊輔*; 中島 健次; 菊地 龍弥*; 蒲沢 和也*; 柴田 薫; 山田 武*

Journal of Molecular Liquids, 342, p.117580_1 - 117580_8, 2021/11

 被引用回数:3 パーセンタイル:25.84(Chemistry, Physical)

エチレングリコール水溶液中に二酸化ケイ素(SiO$$_{2}$$)ナノ粒子を分散したナノ流体の準弾性中性子散乱測定(QENS)およびパルス磁場勾配核磁気共鳴分析(PFGNMR)を行った。研究目的は、このナノ流体の熱伝導率が理論値を超えて増加するメカニズムを解明することだった。得られた実験結果は、SiO$$_{2}$$ナノ粒子の周りの液体分子の運動が非常に制限されているため、SiO$$_{2}$$ナノ粒子の添加により、エチレングリコール水溶液中の液体分子の自己拡散係数が低下していることを示す。そして温度一定の条件で、SiO$$_{2}$$ナノ流体中で、液体分子の自己拡散係数が減少するにつれて、熱伝導率が増加した。

論文

Numerical study on an interface compression method for the volume of fluid approach

岡垣 百合亜; 与能本 泰介; 石垣 将宏; 廣瀬 意育

Fluids (Internet), 6(2), p.80_1 - 80_17, 2021/02

Many thermohydraulic issues about the safety of light water reactors are related to complicated two-phase flow phenomena. In these phenomena, computational fluid dynamics (CFD) analysis using the volume of fluid (VOF) method causes numerical diffusion generated by the first-order upwind scheme used in the convection term of the volume fraction equation. Thus, in this study, we focused on an interface compression (IC) method for such a VOF approach; this technique prevents numerical diffusion issues and maintains boundedness and conservation with negative diffusion. First, on a sufficiently high mesh resolution and without the IC method, the validation process was considered by comparing the amplitude growth of the interfacial wave between a two-dimensional gas sheet and a quiescent liquid using the linear theory. The disturbance growth rates were consistent with the linear theory, and the validation process was considered appropriate. Then, this validation process confirmed the effects of the IC method on numerical diffusion, and we derived the optimum value of the IC coefficient, which is the parameter that controls the numerical diffusion.

論文

Lattice Boltzmann modeling and simulation of forced-convection boiling on a cylinder

齋藤 慎平*; De Rosis, A.*; Fei, L.*; Luo, K. H.*; 海老原 健一; 金子 暁子*; 阿部 豊*

Physics of Fluids, 33(2), p.023307_1 - 023307_21, 2021/02

 被引用回数:34 パーセンタイル:98.3(Mechanics)

流れ場で沸騰が発生する現象は強制対流沸騰として知られている。今回、飽和条件の流れ場中の円柱上での沸騰システムを数値的に調査した。複雑な気液相変化現象に対処するために、擬ポテンシャル格子ボルツマン法(LBM)に基づく数値スキームを開発した。高いレイノルズ数の数値安定性を高めるため、衝突項を中心モーメント(CM)の空間で解いた。CMベースのLBMに適した力場スキームを採用することで簡潔でありながら堅牢なアルゴリズムとなっている。さらに、熱力学的一貫性を確保するために必要な追加項をCMの枠組みにおいて導出した。現在のスキームの有効性は、核形成,成長、および30-30000の間で変化するレイノルズ数の蒸気泡の離脱を含む一連の沸騰プロセスに対してテストされた。開発したCMベースのLBMは、初期気相などの人工的な入力なしに、核沸騰,遷移沸騰、および膜沸騰の沸騰様式を再現できる。結果からプール沸騰ではなく強制対流システムでも抜山曲線として知られる典型的な沸騰曲線が現れることが分かった。また、今回のシミュレーションは膜沸騰領域でも断続的な直接固液接触の実験的観察を支持することが分かった。

論文

LES-WALE simulation on two liquid mixing in the horizontal legs and downcomer; The Open-test condition in the TAMU-CFD benchmark (IBE-5)

安部 諭; 岡垣 百合亜; 石垣 将宏; 柴本 泰照

Proceedings of OECD/NEA Workshop on Virtual CFD4NRS-8; Computational Fluid Dynamics for Nuclear Reactor Safety (Internet), 11 Pages, 2020/11

The fifth international benchmark exercise (IBE-5), the cold-leg mixing CFD benchmark, was conducted under the support of OECD/NEA. The experiment for IBE-5 was designed to visualize the mixing phenomena of two liquids with different density in a horizontal leg (as a simulant of the cold-leg) and downcomer. This paper shows our CFD result on the open test condition in IBE-5. We selected the Large-eddy simulation (LES) solving the filtered equation of flow and concentration fields. Regarding the eddy-viscosity to model the turbulence flux of the momentum at sub-grid scale (SGS), Wall-adapting locale eddy-viscosity (WALE) model, a modified version from the Smagorinsky model, was applied. The experimental geometry was resolved with three different numerical mesh systems. The CFD analysis predicted the laminar-like flow behavior in the horizontal leg. Due to the large density difference between the two liquids, the turbulence production was suppressed strongly, and the velocity fluctuation in the horizontal leg became very slow and small. In contrast, the strong turbulence mixing in the downcomer was predicted. The plume from the horizontal leg entrained with the surroundings and spread circumferentially in the downcomer. The comparison with the TAMU experimental data reveals the good performance of the WALE model. In addition, we discuss the appearance characteristics of the high concentration of the heavy liquid in the downcomer in the LES. The Probability Density Function (PDF) and Cumulative Distribution Function (CDF) are derived based on the predicted time-series of the heavy liquid concentration. The PDF around the mean concentration in the case with the low mesh resolution is larger than that predicted by the higher resolution due to the excessive homogenization of the heavy fluid concentration. This study reveals the importance to note the required mesh resolution to predict the appearance event of the high concentration.

論文

Numerical simulation of the solid particle sedimentation and bed formation behaviors using a hybrid method

Sheikh, M. A. R.*; Liu, X.*; 松元 達也*; 守田 幸路*; Guo, L.*; 鈴木 徹*; 神山 健司

Energies (Internet), 13(19), p.5018_1 - 5018_15, 2020/10

 被引用回数:7 パーセンタイル:26.21(Energy & Fuels)

In the safety analysis of sodium-cooled fast reactors, numerical simulations of various thermal-hydraulic phenomena with multicomponent and multiphase flows in core disruptive accidents (CDAs) are regarded as particularly difficult. In the material relocation phase of CDAs, core debris settle down on a core support structure and/or an in-vessel retention device and form a debris bed. The bed's shape is crucial for the subsequent relocation of the molten core and heat removal capability as well as re-criticality. In this study, a hybrid numerical simulation method, coupling the multi-fluid model of the three-dimensional fast reactor safety analysis code SIMMER-IV with the discrete element method (DEM), was applied to analyze the sedimentation and bed formation behaviors of core debris. Three-dimensional simulations were performed and compared with results obtained in a series of particle sedimentation experiments. The present simulation predicts the sedimentation behavior of mixed particles with different properties as well as homogeneous particles. The simulation results on bed shapes and particle distribution in the bed agree well with experimental measurements. They demonstrate the practicality of the present hybrid method to solid particle sedimentation and bed formation behaviors of mixed as well as homogeneous particles.

論文

The Working group on the analysis and management of accidents (WGAMA); A Historical review of major contributions

Herranz, L. E.*; Jacquemain, D.*; Nitheanandan, T.*; Sandberg, N.*; Barr$'e$, F.*; Bechta, S.*; Choi, K.-Y.*; D'Auria, F.*; Lee, R.*; 中村 秀夫

Progress in Nuclear Energy, 127, p.103432_1 - 103432_14, 2020/09

 被引用回数:4 パーセンタイル:16.23(Nuclear Science & Technology)

WGAMA started on Dec. 31st 1999 to assess and strengthen the technical basis needed for the prevention, mitigation and management of potential accidents in NPP and to facilitate international convergence on safety issues and AM analyses and strategies. WGAMA addresses reactor thermal-hydraulics (Thys), in-vessel behavior of degraded cores, containment behavior and protection, and FP release, transport, deposition and retention, for both current and advanced reactors. This paper summarizes such WGAMA contributions in Thys, CFD and severe accidents, which include the Fukushima-Daiichi accident impacts on the WGAMA activities and their substantial outcomes. Around 50 technical reports have become reference in the related fields, which appear in References. Recommendations in these reports include further research, some of which have given rise to the joint projects conducted or underway within the OECD framework. Ongoing WGAMA activities are numerous and a number of them are to be launched in the near future, which are shortly mentioned too.

論文

Computational study on the spherical laminar flame speed of hydrogen-air mixtures

Trianti, N.; 茂木 孝介; 杉山 智之; 丸山 結

Proceedings of 2020 International Conference on Nuclear Engineering (ICONE 2020) (Internet), 9 Pages, 2020/08

The computational fluid dynamics (CFD) have been developed to analyze the correlation equation for laminar flame speed of hydrogen-air mixtures. This analysis was carried out on the combustion of hydrogen-air mixtures performed at the spherical bomb experiment facility consists of a spherical vessel equipped (563 mm internal diameter). The facility has been designed and built at CNRS-ICARE laboratory. The simulation was carried out using the reactingFoam solver, one of a transient chemical reaction solver in OpenFOAM 5.0. The LaunderSharmaKE model was applied for turbulent flow. The interaction of the chemical reaction with the turbulent flow was taken into account using PaSR (Partial Stirred Reactor) model with 19 elementary reactions for the hydrogen combustion. The initial condition of spherical flame analysis was set so as to be consistent with those of the experiment. The position of the flame front was detected by the steep drop of hydrogen mass fraction in the spherical radii, and the flame propagation velocity was estimated from the time-position relationship. The analysis result showed the characteristic of spherical flame acceleration was qualitatively reproduced even though it has a discrepancy with the experiment. After validating the calculation of spherical experiments, a laminar burning velocity correlation is presented using the same boundary conditions with the variation of hydrogen concentration, temperature, and pressure. The calculation of laminar flame speed of hydrogen-air mixtures by reactingFoam use reference temperature T$$_{rm ref}$$ = 293 K and reference pressure P$$_{rm ref}$$ = 1 atm with validated in the range of hydrogen concentration 6-20%; range of temperature 293-493 K; and range of pressure 1-3 atm.

論文

Enhancement of permeability activated by supercritical fluid flow through granite

野原 壯; 宇野 正起*; 土屋 範芳*

Geofluids, 2019, p.6053815_1 - 6053815_16, 2019/08

 被引用回数:3 パーセンタイル:29.67(Geochemistry & Geophysics)

この地質学的研究は、地熱活動の痕跡を評価するために、花崗岩の電子プローブマイクロアナライザ解析を利用している。角閃石-長石温度計を適用し、ガラス状脈の温度は約700$$^{circ}$$Cと推定された。ボーリング岩石コアの肉眼および顕微鏡の観察の結果は、角閃石および斜長石によるマイクロフラクチャーの充填が、超臨界流体の流れの軌跡であることを明らかにした。粒界マイクロフラクチャーおよび平行マイクロフラクチャーは、白亜紀後期における花崗岩体の定置直後に起こったと考えられる超臨界流体の限られた活動によって形成された痕跡と認識された。現在の高い透水性は、超臨界流体に関連したマイクロフラクチャーネットワークと関係すると考えられた。超臨界流体による割れ目の痕跡は、深さ1200mの坑井を用いて簡易的に把握された。各試験区間の透水性と割れ目の特徴とに基づいて代表的なタイプが提案された。緑泥石充填の割れ目タイプは、相対的に小さい割れ目分布密度を示したにも関わらず、高い透水性に対応した。この研究の結果は、透水性の向上は、花崗岩を流れた超臨界流体によって活性化されたことを示した。

論文

Development of unstructured mesh-based numerical method for sodium-water reaction phenomenon

内堀 昭寛; 渡部 晃*; 高田 孝; 大島 宏之

Nuclear Technology, 205(1-2), p.119 - 127, 2019/01

 被引用回数:3 パーセンタイル:31.36(Nuclear Science & Technology)

ナトリウム冷却高速炉の蒸気発生器におけるナトリウム-水反応現象を評価するため、圧縮性多成分多相流及びNa-水化学反応を対象とした数値解析コードSERAPHIMを開発している。従来のSERAPHIMコードは差分法を用いているが、本研究では、伝熱管の存在する複雑形状領域に対して解析精度を向上することを目的に非構造格子に対応した解析手法を開発した。解析手法妥当性確認の一環として不足膨張噴流実験の解析を実施した結果、解析結果における圧力分布やマッハディスクの形成位置が実験結果と一致する結果を得た。また、Na中へ水蒸気が噴出する現象を対象とした解析を実施し、実現象に対する適用性を確認した。

論文

Numerical simulation on self-leveling behavior of mixed particle beds using multi-fluid model coupled with DEM

Phan, L. H. S.*; 大原 陽平*; 河田 凌*; Liu, X.*; Liu, W.*; 守田 幸路*; Guo, L.*; 神山 健司; 田上 浩孝

Proceedings of 12th International Topical Meeting on Nuclear Reactor Thermal-Hydraulics, Operation and Safety (NUTHOS-12) (USB Flash Drive), 12 Pages, 2018/10

燃料デブリベッドの自己平坦化挙動は、ナトリウム冷却高速炉(SFR)での炉心崩壊事故(CDA)の安全評価における主要現象の1つである。SIMMERコードはSFRのCDA解析のために開発され、安全評価のみならずCDA時の主要な伝熱流動現象の数値解析に適切に適用されてきた。しかしながら、SIMMERの流体モデルは、個々の粒子特性のみならず、粒子間の強い相互作用を表現することは困難である。この問題を解決するため、SIMMERの多流体モデルと粒子に対する個別要素法(DEM)とを結合させた新しい手法を開発し、多相流における流体と粒子との相互作用および粒子挙動を適切に評価することを試みてきた。本研究では、DEMと結合したSIMMERコードの多流体モデルを検証するため、円筒状の粒子ベッドにガスを吹き込んだ自己平坦化試験シリーズの数値シミュレーションを行った。さらに検証を進める必要があるが、シミュレーション結果と試験結果とは適切に一致し、デブリベッドの自己平坦化を評価する手法としての潜在的な可能性を示した。DEMと結合したSIMMERコードは、SFRで粒子ベッドに関する安全評価のための次世代の計算手法として期待される。

論文

Some characteristics of gas-liquid two-phase flow in vertical large-diameter channels

Shen, X.*; Schlegel, J. P.*; 日引 俊*; 中村 秀夫

Nuclear Engineering and Design, 333, p.87 - 98, 2018/07

 被引用回数:11 パーセンタイル:34.62(Nuclear Science & Technology)

Two phase flows in large-diameter channels are important to efficiently and safely transfer mass and energy in a wide variety of applications including nuclear power plants. Two-phase flows in vertical large-diameter channels, however, show much more complex multi-dimensional nature than those in small diameter channels. Various constitutive equations are required to mathematically close the model to predict two-phase flows with two-fluid model. Validations of the constitutive equations require extensive experiment effort. This paper summarizes the recent experimental studies on two-phase flows in vertical large-diameter channels, which includes measuring technique and available databases. Then, a comprehensive review of constitutive equations is provided covering flow regime transition criteria, drift-flux correlations, interfacial area concentration correlations and one- and two-group interfacial area transport equation(s), with discussions on typical characteristics of large-diameter channel flows. Recent 1D numerical simulations of large-diameter channel flows is reviewed too. Finally, future research directions are suggested.

論文

Estimation of mitigation effects of sodium nanofluid for SGTR accidents in SFR

市川 健太*; 神田 大徳; 吉岡 直樹*; 荒 邦章; 斉藤 淳一; 永井 桂一

Proceedings of 26th International Conference on Nuclear Engineering (ICONE-26) (Internet), 6 Pages, 2018/07

ナトリウム自身の反応抑制の研究は、液体ナトリウム(ナトリウムナノ流体)中へのナノ粒子分散の概念に基づいてなされた。ナトリウムナノ流体の実験結果から、ナノ流体の水反応の反応速度と反応熱量はナトリウムのそれらより低いことが明らかになった。ナトリウムナノ流体-水反応ジェットのピークの温度の解析モデルは、われわれによって前述の抑制効果を考慮して開発された。本論文では反応ジェットのピークの温度予測に、この解析モデルを適用し蒸気発生器伝熱管断裂(SGTR)事故の隣接した伝熱管損傷の緩和効果の予測方法を準備した。ナトリウムナノ流体がナトリウム高速炉の2次系冷却材のために使われるとして、設計基準事故事象の緩和効果とSGTRの設計拡張状態をこの方法を用いて推定した。その結果、2次系冷却材でナトリウムナノ流体を用いて損傷を受けた伝熱管の数を減らし、SGTR事故によって発生する圧力を抑制する可能性が得られた。

論文

Numerical study on effect of pressure on behavior of bubble coalescence by using CMFD simulation

小野 綾子; 鈴木 貴行*; 吉田 啓之

Proceedings of 26th International Conference on Nuclear Engineering (ICONE-26) (Internet), 6 Pages, 2018/07

液膜蒸発モデルに基づいた限界熱流束予測評価手法の開発において必要な伝熱面ごく近傍の気泡の挙動や気泡同士の接合現象について、詳細二相流解析コードTPFITによる発泡,気泡生長および接合をシミュレートすることで知見を得る。本発表では、高圧域での沸騰現象の理解と、気泡形状の影響の理解のために、圧力をパラメタとした解析結果に基づいて、気泡の挙動に圧力が与える影響について報告する。

論文

Development of unstructured mesh-based numerical method for sodium-water reaction phenomenon in steam generators of sodium-cooled fast reactors

内堀 昭寛; 渡部 晃*; 高田 孝; 大島 宏之

Journal of Nuclear Science and Technology, 54(10), p.1036 - 1045, 2017/10

 被引用回数:5 パーセンタイル:44.07(Nuclear Science & Technology)

ナトリウム冷却高速炉の蒸気発生器におけるナトリウム-水反応現象を評価するため、圧縮性多成分多相流及びNa-水化学反応を対象とした数値解析コードSERAPHIMを開発している。従来のSERAPHIMコードは差分法を用いているが、本研究では、伝熱管の存在する複雑形状領域に対して解析精度を向上することを目的に非構造格子に対応した解析手法を開発した。解析手法妥当性確認の一環として不足膨張噴流実験の解析を実施した結果、解析結果における圧力分布が実験結果と一致する結果を得た。また、Na中へ水蒸気が噴出する現象を対象とした解析を実施し、実現象に対する適用性を確認した。構造格子及び非構造格子を用いた解析から、非構造格子を適用することの効果についても確認した。

論文

Development of unstructured mesh-based numerical method for sodium-water reaction phenomenon

内堀 昭寛; 高田 孝; 大島 宏之; 渡部 晃*

Proceedings of 17th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-17) (USB Flash Drive), 12 Pages, 2017/09

ナトリウム冷却高速炉の蒸気発生器におけるナトリウム-水反応現象を評価するため、圧縮性多成分多相流及びNa-水化学反応を対象とした数値解析コードSERAPHIMを開発している。従来のSERAPHIMコードは差分法を用いているが、本研究では、伝熱管の存在する複雑形状領域に対して解析精度を向上することを目的に非構造格子に対応した解析手法を開発した。解析手法妥当性確認の一環として不足膨張噴流実験の解析を実施した結果、解析結果における圧力分布やマッハディスクの形成位置が実験結果と一致する結果を得た。また、Na中へ水蒸気が噴出する現象を対象とした解析を実施し、実現象に対する適用性を確認した。

148 件中 1件目~20件目を表示